Sirca Pneumatic Actuators
SERIES: AP series
Rack and pinion type, with single and double stroke adjustment, available in double acting or spring return version, drillings in accordance to ISO 5211/DIN 3337/VDI – VDE 3845 namur.
CE marking and Ped – Atex – Sil – Gost certificate.

69  150x130 pnematic rotary actuator ap SIRCA
70  150x130 pnematic rotary actuator double acting SIRCA
71  150x130 pnematic rotary actuator single acting SIRCA

Pressure range:

  • 2 bar (29 psig) to 8 bar (116 psig) double acting
  • 3 bar ( 44 psig) to 8 bar (116 psig) spring return
  • Max. working pressure 10 bar (145 psig).

Supply:

  • Filtered dry or lubricated air.
  • (Optional)For non corrosive gas water or light hydraulic oil

Temperature range:

  • STD -20°C (-4°F) a + 80°C (175°F)
  • On request +20°C (+68°F) a +150°C (302°F)
  • On request – 50°C (-58°F) a +100°C (212°F).

Rotation:

  • Counterclockwise when Port’A’ is pressurized;
  • Clockwise when PORT ‘B’ is pressurized and for spring return actuators (see principle of operation).

Stroke:

  • 90° with standard adjustment ±3° (AP Series) or
  • Bi-directional travel adjustment ±5° (APM Series).

Lubrication:

  • All moving parts are factory lubricated forcycle life of the actuator.

Construction:

  • In accordance to “Equipment or Protective system intended for use in potentially explosive atmosphere directive 94/9/CE”.
  • Suitable for indoor and outdoor installation.

Connections:

  • Bottom drilling to match valve is in accordance with ISO 5211/DIN 3337 Interface for solenoid valve,shaft top end and top drilling to assemble accessories are in accordance with VDI / VDE 3845, NAMUR.

Inspection:

  • Each unit is hydraulically tested and certified and guaranteed for a minimum of 500.000 moves.

 

Related PDFs :